The Dräger CMS (chip measurement system) combines substance specific measuring Chips with an electronic based Analyzer for an easy to use spot-measurement system. The 10 capillaries in each Chip are filled with a reagent system based on Draeger’s 60+ years of colorimetric chemistry expertise. The analyzer combines a revolutionary optical system for analyzing the color reaction with a mass fl ow controller and pump system that provides unbeatable reproducibility.
The Dräger CMS Analyzer requires no warm-up time. After taking a test, the results can be reported as quickly as 20 seconds. Higher concentrations, which pose a greater hazard, are reported faster than trace background levels. This increases the safety of using the CMS system. TWA and action levels are typically analyzed within 1-2 minutes. After providing the measurement results, the CMS is immediately ready for another test or another Chip for further analysis of the environment.
The Dräger CMS Analyzer does not require gas calibration. All measurement and calibration information is stored on a bar code on the CMS Chip. An electronics and leak check is performed before each measurement so you are assured of accurate indications every time. Operating on 4 "AA" cells, the CMS will deliver about 100 measurements per battery change. Popular applications include TWA screening, confined space entry, and emergency response.
Digital Display of Results
UL, CSA, and MSHA Approved
No Calibration Required
The Dräger CMS Analyzer is available in the following configurations:
- Dräger CMS Analyzer Set with Data Recorder
Includes CMS analyzer, allen wrench and batteries
- Dräger CMS Indoor Air Quality Kit
Includes CMS analyzer, batteries, nylon case and 1 each of Carbon Dioxide, Carbon Monoxide, Formaldehyde and Ozone Chips
Additional Information Available
1. Download Dräger CMS Brochure
2. Dräger CMS Quick Instructions
3. Dräger CMS Chip Selection