Search
Filters
Close
Item Number: EG-PP-100

TEDLAR BAG, 100.0 LITER, PP FITTING

EconoGrab 100L Tedlar Bag with Polyproplyene Fitting
Item Number: EG-PP-100
Manufacturer: Zefon International
Availability: In Stock

Cross-reference of Zefon’s Products with other Manufacturers*

 Zefon Product Number  SKC Product Number
 EG-PP-05  232-02
 EG-PP-1  232-01 / 232-01A
 EG-PP-3  232-03 / 232-03A
 EG-PP-5  232-05 / 232-05A
 EG-PP-10  232-10
 EG-PP-25  232-25
 EG-PP-50  232-50
 EG-PP-100  232-100

*The above table of cross-referenced product information is for comparison purposes only. Zefon is not affiliated with any of the manufacturers and providers listed in the table above. Zefon sells its own products under its own part numbers and does not offer or sell the products of the other manufacturers and providers identified above. The information about non-Zefon products was gathered from published price lists, websites and catalogs of other manufacturers and providers, which information may change from time to time. Please note packaging quantities between manufacturers may vary.

Zefon EconoGrab™ gas sampling bags are excellent quality, low cost tedlar gas sampling bags that feature a single single Polypropylene or Stainless Steel fitting and 1 eyelet.

Features:

  • Single Polypropylene or Stainless Steel fitting that combines the valve and septum into one easy to use fitting. Stainless Steel fitting for use in sampling compounds that are not chemically insert to polypropylene.
  • Suitable for use in most applications.
  • Chemically Inert Tedlar® Film
  • Reusable if purged with nitrogen
  • Easy Storage and Handling
  • Low cost combined with high quality

Applications:

  • Grab Sampling
  • Indoor Air Sampling
  • Gas Blending
  • Assessing Exposures from Leaks and Spills
  • Leaky Underground Storage Tanks
  • Sampling from Vents or Flues
  • Hazardous Waste Site Sampling
  • Measuring Anesthetic Gases in Operating Rooms
  • Stack Sampling
  • Soil Gas Sampling
  • Calibration Gas Standards
  • Ground Water Testing

Product Tips:

  • Be sure to flush bags out with nitrogen or purified air before use.
  • When collecting your sample, do not fill the bag to more than 80% of the rated volume size.
  • Avoid shipping EconoGrab bags by air in unpressurized planes.



Tedlar® is a registered trademarks of DuPont.

Products specifications
CAPACITY 100 Liter
FITTINGS Polypropylene
INTERNAL DIMENSIONS 34" x 30" (86.4cm x 76.2cm)
MATERIAL Clear Tedlar
Products specifications
CAPACITY 100 Liter
FITTINGS Polypropylene
INTERNAL DIMENSIONS 34" x 30" (86.4cm x 76.2cm)
MATERIAL Clear Tedlar
Categories