Item Number: FPTP4537

FILTER, PTFE W/PP SUPP, 0.45µm, 37MM, 100/PK

PTFE Filter, with PP Support, .45µm, 37mm, 100/pk

Item Number: FPTP4537

Manufacturer: Zefon International

Availability: In Stock

Price:$460.00

Qty:

About PTFE Polypropylene Support
Cross Reference
Specifications

Features:

For air monitoring and sampling in aggressive environments.
Strong, chemically resistant membranes for air monitoring and sampling in aggressive environments.
Low chemical background permits highly sensitive, interference-free determinations.
Ensures accurate gravimetric determinations with low tare mass.
Meets NIOSH specifications.
Ideal for filtration of gas and/or organic solvents.

FILTER MEDIA / SUPPORT	PTFE with PP support
TYPICAL THICKNESS	0.45 μm: 135 μm (5.3 mils) 1.0 μm: 135 μm (5.3 mils)
TYPICAL AIR FLOW RATE L/min/cm2 at 0.7 bar (70 kPa, 10 psi)	0.45 μm: 3 1 μm: 7
MINIMUM BUBBLE POINT - IPA bar (psi)	0.45 μm: 0.4 (6) 1 μm: 0.1 (2)
WATER BREAKTHROUGH bar (psi)	0.45 μm: 1.1 (16) 1 μm: 1.0 (15)
TYPICAL AEROSOL RETENTION	Not Applicable

Cross-reference of Zefon’s Products with other Manufacturers*

Zefon Product Number	SKC	Pall	GE Osmonics	Millipore	Advantec MFS
FPTP137	225-17-01	66159	N/A	FALP03700**	N/A
FPTP4537	225-17-04	N/A	N/A	FHLP03700**	N/A

** Laminated to polyethylene instead of polypropylene

*The above table of cross-referenced product information is for comparison purposes only. Zefon is not affiliated with any of the manufacturers and providers listed in the table above. Zefon sells its own products under its own part numbers and does not offer or sell the products of the other manufacturers and providers identified above. The information about non-Zefon products was gathered from published price lists, websites and catalogs of other manufacturers and providers, which information may change from time to time. Any Trademarks listed are owned by their respective owner. No ownership is implied. Please note packaging quantities between manufacturers may vary.

Products specifications