Search
Filters
Close
Item Number: FPTP137

FILTER, PTFE W/PP SUPP, 1.0µm, 37MM, 100/PK

PTFE Filter, with PP Support, 1.0µm, 37mm, 100/pk
Item Number: FPTP137
Manufacturer: Zefon International
Availability: In Stock

Cross-reference of Zefon’s Products with other Manufacturers*

 Zefon Product Number  SKC  Pall  GE Osmonics  Millipore  Advantec MFS
 FPTP137  225-17-01  66159  N/A  FALP03700**  N/A
 FPTP4537  225-17-04  N/A  N/A  FHLP03700**  N/A

** Laminated to polyethylene instead of polypropylene

*The above table of cross-referenced product information is for comparison purposes only. Zefon is not affiliated with any of the manufacturers and providers listed in the table above. Zefon sells its own products under its own part numbers and does not offer or sell the products of the other manufacturers and providers identified above. The information about non-Zefon products was gathered from published price lists, websites and catalogs of other manufacturers and providers, which information may change from time to time. Any Trademarks listed are owned by their respective owner. No ownership is implied. Please note packaging quantities between manufacturers may vary.

Features:

  • For air monitoring and sampling in aggressive environments.
  • Strong, chemically resistant membranes for air monitoring and sampling in aggressive environments.
  • Low chemical background permits highly sensitive, interference-free determinations.
  • Ensures accurate gravimetric determinations with low tare mass.
  • Meets NIOSH specifications.
  • Ideal for filtration of gas and/or organic solvents.

 FILTER MEDIA / SUPPORT  PTFE with PP support
 TYPICAL THICKNESS  0.45 μm: 135 μm (5.3 mils)
 1.0 μm: 135 μm (5.3 mils)
 TYPICAL AIR FLOW RATE
 L/min/cm2 at 0.7 bar
 (70 kPa, 10 psi)
 0.45 μm: 3
 1 μm: 7
 MINIMUM BUBBLE POINT - IPA
 bar (psi)
 0.45 μm: 0.4 (6)
 1 μm: 0.1 (2)
 WATER BREAKTHROUGH
 bar (psi)
 0.45 μm: 1.1 (16)
 1 μm: 1.0 (15)
 TYPICAL AEROSOL RETENTION  Not Applicable
Products specifications
COLOR Plain White
DIAMETER 37mm
MATERIAL PTFE w/PP Support
PORE SIZE 1.0 micron
Products specifications
COLOR Plain White
DIAMETER 37mm
MATERIAL PTFE w/PP Support
PORE SIZE 1.0 micron
Customers who bought this item also bought
Categories