The BUCK Elite™ is a data logging, programmable personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic, and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism, and a rechargeable NiMH battery pack.
The purpose of this pump is to draw air contaminants in through a sampling media such as 25 and 37mm filter cassettes, bubble impingers, long-duration color detector tubes; to gauge personnel exposure to gases, vapors, particulates, aerosols, etc.
No tools are required to operate this pump and a password protected keypad locking system provides uninterrupted operation. The main display allows quick selection to RUN (for sampling) or MENU (to reset pumps data).
Other features include elapsed time, flow rate, and accumulated volume. Easy programming software allows the pump for unattended Start/Stop operation with the capability for up to ten different ON/OFF durations with repeat options. The PC link capability lets you download the sampling data into a PC with Windows XP operating system using the RS232 COM port and the Buck PC link cable.
Features:
· BUCK Elite™ - 1 Pump
· Runs 20+ hours @ 300cc/min (@ 5” backpressure)
· Flow range 0.005-0.6LPM. 5cc/min – 99cc/min using Universal low flow Holder (included).
· High back pressure compensation, up to 36” of w.c.@300cc/min
· BUCK Elite™ - 5 Pump
· Runs 19 hours @ 2.0 LPM (37 mm 0.8µ filter)
· High back pressure compensation, up to 50” of w.c.@2LPM
· High backpressure capability for 25mm 0.45µ asbestos filters
· BUCK Elite™ - 12 Pump
· 50 Hours of Run time at 3LPM(0.8um 37mm MCE filter)
· High back pressure compensation, up to 40” of water @4LPM
· Flow range 3 to 12LPM. Low flow of 50-800 cc/min with Universal low flow adapter.
· Capable for Data logging and programmable for multiple Start/Stop runs with capabiltity of upto ten different ON/OFF durations.
· Accuracy:± 5% of compensation range
· Flow compensation for filter plugging and battery voltage
· “Auto-restart” within one minute of a flow fault
· Memory free rechargeable single pack battery and optional extended run with use of triple packs.
· Battery pack rechargeable while attached or separately
· Compact, rugged, and quiet
· Stainless steel belt clip with built-in tripod connector
· Key pad lock system
· Rapid chargers availaible.
· PC Link Elite software(part no. APB-109101)availaible for easy programming and downloading of data.(Elite pump firmware V2.02 or higher required)
AP Buck Pump Feature Comparison | Libra | Libra Plus | Allin | Elite | Allin Plus |
Constant Flow Compensates for changes in backpressure caused by filter loading and battery voltage |
X |
X |
X |
X |
X |
LCD Display 2 Line LCD shows the elapsed time, accumulated volume and flow rate |
|
X |
X |
X |
X |
Programmable Configure pump start/stop times and sample duration. |
|
|
|
X |
X |
Datalogging Key sampling data is logged and stored for download |
|
|
|
X |
X |
Optional PC Link Software Allows easy pump programming and downloading of data. |
|
|
|
X |
X |
Intrinsically Safe Rated UL Rated in the US and Canada for Class I, II, III Div 1 Groups A-G, T3 hazardous locations |
|
|
X |
|
X |
Advanced Constant Flow Control Additionally compensates for changes in temperature and barometric pressure when regulating the flow rate. |
|
|
|
|
X
|
Additional Information Available