For measuring the air concentration of chemicals including polynuclear aromatic hydrocarbons (PNA), Polycyclic aromatic compounds (PAC), Pentachlorobenzene, Polychlorobenzenes, Hexachlorobutadiene, Nicotine, 1,2,4,5-Tetrachlorobenzene, 1,2,4-Trichlorobenze, Anisidine, Demeton, Hexachlorobutadiene, Tetremethyl Lead, Methyl and Ethyl Methacrylate.
Description
These tubes are used to measure the average concentration of potentially harmful vapors in the air over a defined sample period. To use, the tube is connected to a small vacuum pump that draws air through the tube at a precise flow rate over a period of time. After the sample is taken, the tube is transported to a laboratory where they can remove the adsorbent material and perform analysis by solvent extraction and gas chromatography (GC) to determine the quantity of chemical collected, from which a time-weighted average (TWA) concentration can be calculated.
Specifications
Sorbent Material |
XAD-2® |
Flow Resistance |
≤ 10 kPa at flows up to 500cc/min |
Operating Temperature Range |
10 to 40o C between 20-80% RH |
Blank Tube Background |
≤ NIOSH LOD for the target vapor |
Standards Compliance |
ISO 22065 |
Product # |
Tube OD |
Tube Length |
Primary Sorbent Weight |
Backup Sorbent Weight |
ZST-080 |
8mm |
110mm |
100mg |
50mg |
ZST-081 |
7mm |
70mm |
80mg |
40mg |
ZST-083 |
8mm |
110mm |
150mg |
75mg |
ZST-084 |
8mm |
110mm |
400mg |
200mg |
Additional Information Available
Zefon XAD-2 Sorbent Tube Operating Instructions
*XAD is a registered trademark of The Dow Chemical Company or an affiliated company of Dow