The Widest Flow Range of Any Personal Air Sampling Pump
The Gilian GilAir® Plus Personal Industrial Hygiene Air Sampling Pump features wide dynamic flow and pressure ranges to address all personal air sampling methods with flow ranges between 20 and 5,000 cc/min. With patent pending QuadModeSM air sampling technology, the GilAir Plus can perform both high-flow constant pressure and constant flow (450-5,000 cc/min) and low-flow constant pressure and constant flow (20-499 cc/min) with a single pump without external adaptors. It's like getting two pumps in one.
- Samples particulates, vapors, gases, and metal fumes
- Works with all common sampling media
- Multi-language capability: English, Spanish, French, Italian, Dutch, Portuguese and German
- Outlet port for bag sampling
GilAir Plus is a smart air sampling pump that provides ambient or standard temperature and pressure corrected display (STP model) and data-logging for up to 16 sampling events (STP and Datalog model). The pump has high back pressure capability of up to 40" H2O in high flow and up to 40" H2O in low flow. An automatic self check system ensures sample accuracy. In the event of a fault condition, the pump's selectable automatic fault recovery feature attempts to restart the pump up to 10 times every 3 minutes to determine if the fault condition has been cleared.
One-third smaller than traditional personal air sampling pumps and weighing less than 21 oz. (595 g), the GilAir Plus provides superior operator comfort. An integrated belt clip securely attaches the pump in a horizontal position, allowing workers a full range of motion to perform a wide variety of tasks without interference or discomfort.
Barometric Pressure Compensation
When sampling at altitudes of up to 8,000 feet above or 8,000 feet below sea level, GilAir Plus has the capability of automatically correcting the flow rate for altitude changes to maintain constant flow accuracy of +/- 5% over this barometric pressure range. This feature permits GilAir Plus calibration at ground level and sampling at high elevations or deep mines without loss of flow accuracy or the need to calculate and use manual correction factors. GilAir Plus is the only personal air sampling pump with this capability.
Multi-pump DocksThe GilAir Plus dock provides charging and communication functions for the STP and data-logging models. Once docked, the PC application allows users to review datalogs, generate sampling reports, manage sampling programs, and create pump set-up profiles that expedite deployment of large pump fleets. The SmartCalSM feature uses the dock as a communication link between appropriate calibration devices and the GilAir Plus. SmartCalSM automates calibration and records pre and post sample calibrations in the pump's datalog.
Gilian CONNECT is our industry-leading PC application for managing air sampling data and Gilian Plus Series pumps.
NEW - Motion Dection & Bluetooth Module
Motion Detection - Detect and measure up to 3 levels of activity (active, stationary, inactive) of each worker, ensuring sample integrity
Bluetooth Connectivity combined witht he Gilian Connect Mobile app (ios and android) you can:
- Remotely monitor an air sampling pump up to 5 meters away
- Monitor without disturbance to the worker
- Stay in unrestricted areas while workers are in restricted areas
- No need to suit up
- Start, stop or pause the sample remotely
- Monitor and graph flow rate, sample run time, and volume remotely
- Identify if cassette is overloading
- Identify if filter media is detached
- Report on current conditions
- Caputure a screen shot of current conditions
- Record Time/Date stamp
- GPS coordinates (actual address)
- View/Document Pump number
- E-mail a report
- Check the status of multiple pumps in the same area.
Additional Information Available